Hangzhou Haina Environmental Protection Tech Co., Ltd.
Add to Cart
Special Model 1809-100GPD Reverse Osmosis Membrane for RO Water Purifier
Our membrane products are widely used in the application fields of municipal sewage reclamation, industrial wastewater zero discharge, reclaimed water reuse, pure water preparation, highly polluting wastewater treatment, river restoration, decentralized rural sewage treatment, process concentration, and separation, etc., with rich application experience and engineering project cases.
Membrane Performance Specifications:
| Membrane Model No. | Min. Salt Rejection (%) | Stabilized Salt Rejection (%) | Permeate Flow Rate (gpd) | Test Temp. (ºC) | Test Pressure | Test Water TDS |
| 1808-50 | 95 | 97 | 50 | 25 ºC | 70 psi | 500 ppm |
| 1809-100 | 95 | 97 | 100 | 25 ºC | 70 psi | 500 ppm |
| 1810-50 | 95 | 97 | 50 | 25 ºC | 70 psi | 500 ppm |
| 1810-75 | 95 | 97 | 75 | 25 ºC | 70 psi | 500 ppm |
| 1810-100 | 95 | 97 | 100 | 25 ºC | 70 psi | 500 ppm |
Note:
1. Single membrane permeate flow change in the range of ±15%
2. If users do not strictly follow the operating conditions provided in this sample, Hynamo Membrane will not bear all the consequences arising therefrom.
3. The water yield listed in the table is the average, and the difference between the minimum water yield of a single membrane element and the nominal value shall not exceed 20% of the nominal value.
4. During the first hour of operation, the water produced by nanofiltration should be discharged.
5. It is prohibited to add any chemical agents that may affect the membrane components during storage and operation. If such chemical agents are used in violation, Hynamo Membrane will not bear all the consequences arising therefrom.
6. Before leaving the factory, the membrane components are strictly tested, and the PP bags are used for inner packaging and yellow double-corrugated boxes for outer.
HN-JCM Special-characteristic RO Membrane Elements
We have independent research and development ability to manufacture all kinds of special-characteristic RO membrane according to customers' different requirements to be used in all RO systems which can produce pure water and save more cost.
Plug-in style:1808-40GPD,1809-50GPD,75GPD,100GPD.
Low energy&large flux RO membranes:2012-150GPD,2812-200GPD,2812-300GPD.
Anymore,we accept developing certain special membrane elements from all enterprises.
FAQ:
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.